How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of specific steps to add an additional ignition key. This requires the use of a handheld computer called Tech-2, to be used by the dealer. Then, a new transponder and key are required to be purchased.
It is an excellent idea to rotate your keys so that one doesn't get damaged faster than the other. This will also ensure that your keys remain in pristine condition.
Replacement Case
As opposed to the traditional Saab keys of the past, the new key fobs are equipped with electronics which makes it more difficult to copy. This has made stealing cars a lot more difficult than it was twenty years ago. But, it has also made replacing lost keys a comparatively expensive endeavor.
Every owner of a Saab 9-3 needs to have at minimum two working keys. It's expensive to replace a lost key as it requires replacing the CIM module, and reconfiguring the locking cylinders. Dealers usually charge between $100-$200 to do this.
There are ways to avoid these costs. Some parts dealers will use the code of the spare key to cut a new metal blade at a fraction the cost of the dealer. The key must, however, be the same as the original one in order to function within your car.
You can also replace the case yourself by following these steps. You'll need an flathead screwdriver and patience. With the screwdriver slowly pry the plastic apart and then separate the emergency key from the case. Once you have the case open, take the electronics out and place them into your new case. Be sure to put the correct badge and key back inside the case, too.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive part that can be replaced quickly and easily. The YouTube video of Cyclone Cyd demonstrates how to replace the remote fob battery in only four steps. This tutorial should work for any modern saab-type key fob, however, the procedure may differ slightly.
The button is typically located close to the Saab logo on the back of the fob. This button is usually on the back of the fob, right next to the Saab Logo. Then use an screwdriver with a flat head to insert into the small hole inside this button. This should be sufficient to open the fob case to allow you to change the battery.
After you have installed the new batteries CR1632, you can reassemble your remote key fob. Then, you can program it into your car. The whole process should not be more than an hour. It is a very simple procedure that doesn't require any special tools.
If you lose a key, the procedure will be somewhat more complex, but it can still be done. The dealer will need to find the VIN number of the car and then order a replacement key blade and TWICE module, both with the correct unique code. The dealer will then have to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob is the piece that locks and unlocks your car. It is equipped with an internal battery. The batteries are able to last for and eventually fail. This is a problem that affects all cars and the good news is that you can replace the batteries in a majority of fobs, without replacing the whole case. Amazon sells fobs for replacement that already have all the electronics in place. You can simply remove the case and replace the batteries. It is necessary to remove the emergency key before you can replace the batteries. To do this, place a small flathead screwsdriver into the slot in the middle of the. The case will split when you turn the screwdriver around it.
If you're about to replace the keys, ensure that you have a spare as this can reduce your total cost by a substantial amount. If you have a spare, you can ask the dealer to cut an entirely new key and then program it to your car, which is much cheaper than replacing the whole key fob.
If you do not have a spare key you can add an additional key to your car, however it requires a lot of research and effort. The cost of adding a second key is about a few hundred dollars and it requires programming of the car's computer. Professionals can do this but it's not a cheap option.
Replacement Ignition
The current SAAB 9-3 features an advanced alarm system based on a key code. This means that when you lose your sole working key, adding another one can be very expensive as the car has to have a unique computer module installed and it must also be specifically programmed to accept a new key. Dealers can even charge hundreds of dollars to program an additional key when they are not able to complete the task.
lost saab key will charge you a high price to replace your car computer (also called the CIM or SAAB twice) if you lose your only working key. We can reprogram the existing EEPROM inside your car's computer so that it is ready to accept an additional key. This will save you more than 50% off the price you'd pay an auto dealer.
If you've been a long-time owner of an 03-11 SAAB 9-3, then you likely know that the ignition key isn't very robust. They can become extremely sticky and the buttons can be ripped off every now and then It is recommended that you consider purchasing a new one if yours isn't working as it should. It's not as difficult as it seems to replace the ignition key. With the right tools, it is able to be accomplished in a short time.